Simple failure of Taiwan original electronic tensile testing machine (exclusive)
Taiwan original electronic tensile test machine when the fault and abnormal operation, please refer to the "simple troubleshooting" to find out the cause of the failure and treatment. When the failure phenomenon does not conform to any of the following items or serious failure or damage to the parts, please contact the company.Question: when the power switch is on the system without power supply?
1 please check the power plug of the system is indeed inserted into the socket, there is no loose. If you are free, please do.
2 check the system emergency stop button is open, if you press the state, please open it.
3 check socket voltage is normal, if not normal, please change socket.
4 check whether the power switch can be normal, if not normal, please inform our company.
5 if everything is correct, please inform our company.
Two, the problem: the computer system can not boot?
1 please check if the power supply switch is open, if there is no open, please turn on the power supply.
2 check the host, the screen and the peripheral parts of the joints are connected, if you do not have the right to the joint.
There are 3 check disk floppy disk drive, such as a disk will be removed and then please restart.
4 if everything is correct, please inform our company.
Three, the problem: the machine can not be moved after the completion of the machine?
1 please check the computer system is open, if not open, please open.
2 please check whether the limit switch is pressed, if it is pressed, and the limit switch error signal is released and the machine will be moved to the counter.
3 please check the settings of the computer system is correct, such as the "protection setting" setting is more than the machine capacity, set up in detail, please refer to the operating instructions".
4 if everything is correct, please inform our company.
Four, the problem: the computer can not enter the "main operation screen"?
1 please make sure that the input screen is correct, if the error please enter the correct password, if the password is lost, please inform our company.
2. Please make sure that there are no big instruments on the window platform. If you don't exist, please set up a new shortcut.
3 please make sure that the computer system is being implemented in other applications, such as other programs are in use, please close other programs.
4 if everything is correct, please inform our company.
Five, the problem: the machine to produce abnormal vibration and noise?
1. Please check the machine four foot seat is the average contact pedestal. If no, please adjust four foot seat so that the average contact.
2 check system power supply voltage is normal, stable, if no, please replace a stable normal power supply.
3 the inspection machine screw is loose, if loose, please tighten the screws.
4 if everything is correct, please inform our company.
Six. Question: the data of the test is abnormal?
1 please make sure that the "test piece" clip is true, if not, please do not do.
2 please check the "power sensor" "decoder" setting is correct, if not please see the operation instructions, set the completion.
3 please check whether the "power" of the "zero" of the "zero", if not, please restart the test before the start of the test, and then press the "power" to "zero" ".
We treasure big instrument specialized in producing all kinds of electronic tensile testing machine which Taiwan original electronic tensile testing machine is widely favored by users, all of which have some questions about the use of skills can consult our staff 400-6677-223, we are 24 hours for you!
双语对照
Copyright©Dongguan Perfect Instrument Co., Ltd.